Moving the Scales of Labor and Quality with Brake Truck Repair Service in Wamego KS

by | Nov 12, 2015 | Automotive


Latest Articles



How much does a brake truck repair service in Wamego KS cost? The answer can be as little as $50 and as high as $500. There are two core variables involved with determining the cost of a brake repair on a truck in Kansas. These are the costs of labor and the quality of the parts.

The Scale of Labor

Each brake will likely take about 30 minutes to an hour. That would come to about four hours for all four brakes. Speak with the automotive firm for an assessment or quote of labor costs involved. The costs will vary wildly depending on the season. For example, is the automotive company facing a slow season? It also depends on the overall economy in Kansas, which is steadily improving.

The Scale of part Quality

When it comes to truck repair, there are typically three grades of quality. There are basic generic pads, mid-grade average pads, and high-quality ceramic pads. The price difference is usually in intervals of $50 as the quality increases to the top tier. Brakes are usually quoted in sets of two and are almost always installed in either the two front tires or the two back tires. It is relevant to use high-quality brakes in the front while holding back on generic or average-grade brakes for the rear tires. It may also be advisable to get two done first, and follow-up with the latter two at a later date.

Other Factors

The brakes are interconnected with a lot of other parts of the truck, and those can also be damaged. Rotors and hoses are commonly replaced alongside the brakes because of the fit or general wear-and-tear. This will also affect the cost though not as much as the quality of the parts or the cost of labor in the area. Calipers are also often expensive and are commonly replaced with the brakes due to their sensitivity.

Strive for quality while also getting a replacement that is comfortably affordable. In all, the cost could be low when coming in at the right time and scaling back to an accessible ceramic grade.

Similar Articles